DIN 536 Crane Rail
AGICO STEEL RAIL
DIN 536 Crane Rail for Sale
DIN 536 crane rail is a German standard series of crane rails. It is also known as “A” type crane rail. DIN 536 crane rail has a wider rail head and base, and a thicker web. And its height is relatively low. Their outlines have been optimized. It has excellent bending strength and stability. They can withstand enormous wheel pressure and vertical loads. The common models include A45, A55, A65, A75, A100, A120, A150, etc. It is widely used in industrial cranes, port machinery, and other heavy rail transport equipment.
- Standard: DIN standard
- Model: A45, A55, A65, A75, A100, A120, A150.
- Material: 50Mn, U71Mn, 900A.
Features of DIN 536 Crane Rail
Design optimization
DIN 536 crane rail has a wider rail head and base and a thicker web. It can effectively reduce wheel pressure and reduce rail surface wear and fatigue. Resisting deformation under high loads.
Good material properties
DIN 536 crane rail is made of high-strength, highly wear-resistant steel. It can withstand the enormous friction from the wheels. Extend the service life of steel rails.
High security
The DIN 536 standard has strict requirements for the straightness, torsion, and dimensional tolerances of rails. This ensured the smooth operation of the crane. This reduces the risk of derailment.
Easy to install
The bottom of the DIN 536 crane rail is wider. It can be easily fixed to the track using methods such as pressure plates and welding. It has a standardized cross-section. The daily inspection and maintenance is easy.
Hot-selling Models in the DIN 536 Series
- A45
A45 is a light rail, with a rail head width of 45 mm. Its size is the smallest, and its weight is the lightest. It is suitable for Light-duty material handling systems, small suspended monorail cranes, and light-duty stacker cranes.
- A55
A55 is a medium and light rail, with a rail head width of 55 mm. Its load capacity is moderate in lightweight applications. It is an upgraded replacement for the A45, suitable for use as a bridge crane in small and medium-sized workshops.
- A65
A65 is a medium-sized rail, with a rail head width of 65 mm. The load capacity and dimensions are in the middle. It is the standard choice for many medium-sized industrial applications. It is suitable for a medium-sized bridge crane.
- A75
A75 is a medium and heavy-duty rail, with a rail head width of 75 mm. The bearing capacity is a significant improvement. It is suitable for cranes in large machine shops.
- A100
A100is a heavy rail, rail head width 100 mm. It has a wide rail head. It can withstand high wheel pressure and frequent impacts. It is suitable for rail-mounted gantry cranes and heavy-duty bridge cranes.
- A120
A120 is a super-heavy rail, with a rail head width of 120 mm. It has an extremely high load-bearing capacity and impact resistance. It is suitable for a large quay container crane.
- A150
A150 is an extremely heavy rail, with a rail head width of 150 mm. It is one of the largest models in the DIN 536 standard. The load capacity at the top level in the industry. It is suitable for a giant gantry crane.
Parameter of 536 Crane Rail
| DIN536 (mm) | A45 | A55 | A65 | A75 | A100 | A120 | A150 |
|---|---|---|---|---|---|---|---|
| Head Width | 45 | 55 | 65 | 75 | 100 | 120 | 150 |
| Base Width(mm) | 125 | 150 | 175 | 200 | 200 | 220 | 220 |
| Rail Height(mm) | 55 | 65 | 75 | 85 | 95 | 105 | 105 |
| Waist Thicknesst(mm) | 24 | 31 | 38 | 45 | 60 | 72 | 80 |
| Nominal Weight (kg/m) | 22.1 | 31.8 | 43.1 | 56.2 | 74.3 | 100 | 150.3 |
| Length（m） | 10-12 | 10-12 | 10-12 | 10-12 | 10-12 | 10-12 | 10-12 |
| Material | 700/900A/1100 | 700/900A/1100 | 700/900A/1100 | 700/900A/1100 | 700/900A/1100 | 700/900A/1100 | 700/900A/1100 |
Selected Materials
In practical applications, To ensure that the crane rails can withstand the enormous wheel pressure and impact. Manufacturers will select high-strength materials based on load-bearing requirements. DIN 536 crane rail typically uses tensile strength to correspond to different rail material grades.
- R700
Its minimum tensile strength is approximately 700 MPa. It belongs to the standard strength grade. It is suitable for light to medium load crane rails, and is economical and practical, such as models A45 and A55.
- R900A
Its minimum tensile strength is approximately 900 MPa. It belongs to the high-strength grade. It has good wear resistance. It has good wear resistance. It is widely used in medium and heavy-duty scenarios, such as the A75 and A100 models.
- R1100
Its minimum tensile strength is approximately 1100 MPa. This ultra-high strength is usually achieved through a special heat treatment process. It is widely used in environments with heavy loads and high frequency of operation, such as the A120 and A150 models.
Global Customization Services
Length customization
We can offer non-standard length rails according to customer requirements. We can also perform pe-treatment of the rail ends, such as drilling or mitering, if required. Minimize rough processing at the construction site. We have taken your convenience in transportation and installation into full consideration.
Surface treatment
We offer specialized surface protection solutions for different usage environments to extend the service life of rails. It has been coated with anti-rust oil and anti-rust paint. Ensure the rails have good durability in humid or chemically corrosive environments. Reduce maintenance costs.
Quality Inspection
Rigorous quality testing ensures the safety of our products. It mainly includes tensile testing, hardness testing, and impact testing. Eliminate defective DIN 536 crane rails to ensure the safe operation of crane systems.
Parts supply
AGICO provides one-stop track system solutions. We also offer rail fastening systems that are compatible with DIN 536 crane rail. Ensure all components fit together perfectly to prevent performance degradation caused by incompatible parts.
Applications of DIN536
Port: This is the most typical application scenario for DIN 536 crane rail, which usually uses ultra-heavy rails such as A100, A120, and A150.
Logistics: Typically used in automated and efficient material handling systems. For example, stacker crane tracks are usually made of lighter A45, A55 or A65.
Industry: DIN 536 crane rail is used for lifting and transporting materials within the factory. Applications range from light-duty (A55, A65) to heavy-duty (A100, A120).
Power generation facilities: At the installation site, large gantry cranes use crane rails to assemble the towers and blades of wind turbines.